Arduino . IoT . Robotic .Testing Instrument . Online Solution
Measuring
Burst Tester
- Three test modes of burst, creep and creep to failure are available.
- PLC programmable logic controller realizes precise pressure and time control.
- 7 inch TFT touching screen for convenient parameter setting and test operation.
- Multiple groups of test parameters can be save to avoid the repetitive setting time.
- Test result auto statistics and storage.
- Program customization available.
Inflating Head Φ4mm (Standard)
Gas Pressure 0.4 MPa ～ 0.9 MPa
Port Size Φ6 mm PU hose
Dimensions 400 mm (L) × 270 mm (W) × 180 mm (H)
Pedestal Size 375 mm (L) × 275 mm (W) × 345 mm (H)(Multiple fixtures available)
Power AC 220V 50Hz
Standard : ISO 11607-1, ISO 11607-2, ASTM F1140, ASTM F2054, GB/T 10440, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T 10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002
Optional : Calibration Report
Other Type
Carbide Pin
purpose of carbide pin is to measure and inspect the diameter of small holes, it also can be used as a test bar for geometric deviations measurements.
custome diameter size and custom length
accuracy +/-0.002mm.
custome diameter size and custom length
accuracy +/-0.002mm.
Tensile Tester
Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure.